10 11
USING CHROMECAST BUILT-IN
Chromecast built-in is a technology that lets you stream your favorite music, radio or
podcasts from your mobile device to your speakers.
1. After Big Blue Studio has been set up in the Google Home app, tap the Cast
button in any Chromecast-enabled app and select the Big Blue Studio.
Consult the Google Home app for a list of apps that are Chromecast-enabled.
2. Audio will stream from the Chromecast-enabled app to Big Blue Studio over Wi-Fi.
The WI-FI MODE LED INDICATOR is solid white to indicate Big Blue Studio is
in Wi-Fi mode. When audio is streaming, the WI-FI STATUS LED INDICATOR will
be solid green. If audio is not streaming, the WI-FI STATUS LED INDICATOR will
flash green.
3. Use VOLUME + on Big Blue Studio to increase the volume.
4. Use VOLUME - on Big Blue Studio to decrease the volume.
POWER
1. Press the POWER BUTTON to turn Big Blue Studio on. The LED ring will turn
on. The WI-FI STATUS LED INDICATOR will be solid yellow, indicating the Big
Blue Studio is in Aux mode (if last mode used was Wi-Fi Casting or Aux) or
the BLUETOOTH
®
MODE LED INDICATOR will flash white, indicating Big Blue
Studio is in Bluetooth
®
mode (if last mode used was Bluetooth
®
).
2. To use Chromecast built-in, refer to the instructions on page 11.
3. To use Bluetooth
®
, refer to the instructions on page 13.
4. To use Aux In, refer to the instructions on page 14.
5. To power off (put Big Blue Studio in stand by mode), press the POWER BUTTON.
Notes:
• Big Blue Studio will go into low power mode immediately if no audio is
streaming in Wi-Fi or Bluetooth
®
mode. After 20 minutes of no audio
streaming, the Big Blue Studio will go into standby mode. All LED
INDICATORS and LED RING are off in standby mode.
• To wake the Big Blue Studio from standby mode, press the POWER
BUTTON, activate audio using Chromecast built-in, or plug the Aux in cable
into the AUX IN PORT.
318421 Big_Blue_Studio_Chrome
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
To Next Page
Loading...
