14 15
318421 Big_Blue_Studio_Chrome
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
USING AUX IN
Connect your audio device to the Big Blue Studio with a 3.5mm-to-3.5mm cable (not
included).
1. Plug one end of the cable into your audio device, just like you would a pair of
headphones.
2. Plug the other end of the cable into the 3.5mm port labeled AUX IN on the Big
Blue Studio. The WI-FI STATUS LED INDICATOR will be solid yellow.
3. Use your audio device to control music playback. Adjust volume with your
audio device or with the volume controls on Big Blue Studio.
LED RING ON/OFF
1. Press the LED RING ON/OFF BUTTON to turn the LED RING off.
2. Press the LED RING ON/OFF BUTTON to turn the LED RING on.
RESET
1. With Big Blue Studio powered on, press and hold the WI-FI
®
SET UP/RESET
BUTTON until the LED RING turns off (approximately 5 seconds). The WI-FI
STATUS LED INDICATOR is solid white for several seconds while the Big Blue
Studio resets.
2. After reset is complete, the WI-FI STATUS LED INDICATOR is solid red for
several seconds while the Big Blue Studio is booting up. The WI-FI STATUS
LED INDICATOR may turn on and off during the booting up process, this is
normal.
3. After booting is complete, the WI-FI STATUS LED INDICATOR continuously
flashes white, indicating the Big Blue Studio is ready to be connected to a
Wi-Fi network through the Google Home app.
COMPATIBILITY
Bluetooth 4.0 or above device with A2DP and AVRCP.
CARE AND MAINTENANCE
To clean, wipe the Big Blue Studio with a soft, dry cloth.
To Next Page
Loading...
