Brookstone OSIM uAstro - Product Care and Storage; Storing the Massage Chair; Cleaning Procedures

Note
• In an emergency or any malfunction, press the [
] button to stop the
massage immediately. The rollers will not return to the storage position.
Press the [
] button to bring the rollers to the storage position again
and turn off the main power switch.
Stopping a Massage Session
Press the [
] button to stop the massage program. The rollers will move back to the
storage position and all airbags will deflate, ending the massage. The [
] button will
illuminate yellow and go into standby mode.
Pausing a Massage Session
To pause a massage, press the [
] button on the controller. This will temporarily freeze
all operations. Press the [
] button again to resume massage.
Massage Programs and Selections
Changing From Localized Area or Manual Massage Program to Automatic
Massage Program
To switch from Localized Area or Manual Massage Program to Automatic Massage
Program, simply press the desired Automatic Massage Program button. This will cause
the rollers to return to their storage position. However, changing between programs will
not reset the timer.
22
647180_INS_OSIM uAstro Massage Chair _Doc. Size: 148mm W x 210mm H_Output at 100% Prints 1/0 Black