To Next PageTo Next PageWhat to do if Brother Label Maker is not printing after pressing print?
• Verify that you've entered text and the tape cassette is correctly installed with enough tape. • If the tape is bent, trim the bent part and guide the tape through the exit slot. • In case of a tape jam, take out the cassette, remove the jammed tape, and cut it. Make sure the tape end goes through the guide before putting the cassette back in.
How to fix a Brother 5997374232630 that is not printing correctly?
• Remove the tape cassette and then reinstall it, pressing firmly until you hear a click. • If the print head is dirty, gently clean it using a cotton swab or the optional print head cleaning cassette (TZe-CL4).
How to fix Brother Label Maker if the label is not cut automatically?
Check the Cut Option setting. Alternatively, press the Feed & Cut key to feed and cut the tape.
Why does my Brother Label Maker stop while printing a label?
• If you see striped tape, it means you've reached the end of the tape; replace the cassette. • You can also try replacing all the batteries or connecting the AC adapter directly to the Brother P-touch Labeling System.
Why is the screen blank on my Brother Label Maker?
• Make sure the batteries are correctly installed and the AC adapter (designed for your P-touch labeling system) is properly connected. • Also, ensure the rechargeable Li-ion battery is fully charged.
What to do if my Brother 5997374232630 screen locks up?
Try resetting the internal memory to its initial settings. If that doesn't work, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if the ink ribbon is separated from the ink roller in my Brother Label Maker?
If the ink ribbon is broken, replace the tape cassette. If not, leave the tape uncut and remove the tape cassette, then wind the loose ink ribbon onto the spool.
General| Display | LCD |
|---|---|
| Keyboard | QWERTY |
| Tape Type | TZe |
| Maximum Print Resolution | 180 dpi |
| Printing Method | Thermal Transfer |
| Print Resolution | 180 dpi |
| Power | AC adapter or rechargeable battery |
| Connectivity | USB |
| Power Source | AC adapter or rechargeable battery |
| Tape Size | 3.5mm |
