To Next PageTo Next PageWhy printed barcode from Brother Label Maker cannot be read?
If the printed barcode from your Brother Label Maker cannot be read, it may be due to the scanner being incompatible. Try using another scanner. It is recommended to print the Bar code with Print Quality options set to "Give priority to print quality".
How to fix Brother QL-570 QL printer when it does not print?
If your Brother QL Label Maker isn't printing, ensure the cable is securely connected and the DK Roll is installed correctly with enough roll remaining. Also, verify that the DK Roll compartment cover is closed. If a print or transmission error occurred, turn the printer off and on again. If the issue persists, consider contacting your Brother dealer.
How to reset Brother QL-580N Label Maker and delete data?
To reset your Brother QL-580N Label Maker, press and hold the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two seconds. Continue holding down the ON/OFF button, and press the CUT button six times. The machine will reset, deleting all transferred data from your PC and restoring it to factory settings.
Why is the power button not lit on my Brother QL-570?
If the power button on your Brother Label Maker is not lit, check that the power cord is inserted correctly. If it is, try plugging it into another electrical outlet.
How to update layout style on Brother Printer after installing a new label roll?
If the layout style is not updated when a new label roll is installed and the Add-in is still activated on your Brother printer, exit the P-touch Add-In. Then, load the second label roll type, reactivate the P-touch Add-in, choose "Select Layout", and verify the layout.
What to do if Brother Printer shows a data transmission error?
If a data transmission error appears on your personal computer when using the Brother QL printer, verify that the correct port is selected in the Printer Properties dialog box under the “Print to the following port” list. Also, check if the printer is in cooling mode (orange flashing LED). If so, wait until the LED stops flashing before trying to print again. Finally, if other users are printing large amounts of data via network, try again after their jobs are completed.
What to do if the power button is not lit on my Brother Printer?
If the power button on your Brother printer is not lit, ensure the power cord is correctly inserted. If it is, try plugging the printer into another electrical outlet.
What to do if a data transmission error appears for my Brother QL-570 on my computer?
If you see a data transmission error on your computer when using the Brother Label Maker QL-570, check that the correct port is selected in the Printer Properties dialog box under "Print to the following port". Also, if the LED lamp is flashing orange, the QL-570 is in cooling mode; wait until it stops flashing before printing again.
How to fix Brother QL-570 Label Maker cutter error?
If a cutter error occurs with your Brother Label Maker, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position, and the machine will turn off automatically. After the machine is off, inspect the cutter unit and remove any paper jam.
Why does Brother Label Maker print labels with streaks?
Streaks or poor-quality characters on Brother Label Maker prints can occur if the print head or roller is dirty. Lint or dirt from the roller may stick to the print head. If this happens, clean the roller.
General| Print technology | Direct thermal |
|---|---|
| Vertical printing | Yes |
| Maximum resolution | 300 x 300 DPI |
| Maximum print height | 59 mm |
| Ethernet LAN | No |
| Dimensions (WxDxH) | 134 x 208 x 141 mm |
| Product color | Blue, Silver |
| Maximum label width | 62 mm |
| Maximum label length | 1 m |
| Tape type | DK |
| Tape cutting | Automatic |
Weight and Dimensions| Weight | 1130 g |
|---|
Details on the compilation, publication, and subject to change of the guide's content and product specifications.
Lists registered trademarks of Brother Industries and other companies, and copyright information.
Defines symbols used in the guide, indicating warnings, mandatory actions, and helpful tips.
Provides essential safety instructions to avoid fire, electric shock, or other damage during machine use.
Explains the meaning of WARNING and CAUTION indicators and specific action symbols.
Precautions for handling the machine, avoiding electromagnetic interference, and proper operation.
Guidelines for safe use of the power cord and handling of DK Rolls, including environmental considerations.
Lists all items included in the printer package and starter rolls, advising to check for missing or damaged items.
Details the front and rear components of the main printing unit, including buttons and ports.
Instructions on how to connect the power cord to the printer and an electrical outlet safely.
Details on using the enclosed USB cable and RS-232C serial cable for connectivity.
Specifies the type of network cable (Category 5) required for QL-580N wired Ethernet connection.
Step-by-step instructions for installing P-touch Editor, Address Book, and drivers on Windows.
Instructions for installing P-touch Editor and drivers on Mac OS X, including printer setup.
Step-by-step instructions for installing P-touch Editor, Address Book, and drivers on Windows.
Instructions for installing P-touch Editor and drivers on Mac OS X, including network setup.
Procedure for removing P-touch Editor software from Windows XP, Vista, and 7 operating systems.
Steps to remove the printer driver from various Windows versions, including driver package removal.
General steps to create label data on a PC and print it using P-touch Editor or Office applications.
Instructions for creating and transferring label data to the printer for standalone printing without a PC.
Methods to start P-touch Editor Help on Windows, including via Start menu and the New/Open dialog.
Methods to start P-touch Editor Help on Mac OS X, using the New/Open dialog or the Help menu.
Explains how the DK Roll automatically cleans the print head during use.
Steps for cleaning the printer roller using a dedicated cleaning sheet to maintain performance.
Details on the LED display, printing method, print head specifications, and maximum printing width.
Information on supported interfaces (USB, RS-232C, Ethernet) and power supply requirements.
Specifications for the printer's size (W x D x H) and weight, with and without DK Rolls.
Lists compatible operating systems (Windows, Mac OS) and required interfaces for printer operation.
Specifies hard disk space and memory requirements for installing software on different operating systems.
Recommended operating temperature range and humidity levels for optimal printer performance.
Catalog of available DK die-cut label stock numbers, descriptions, and prices.
Catalog of available DK continuous length tape stock numbers, descriptions, and prices.
Information on purchasing cleaning sheets (Stock No. DK-CL99) for printer maintenance.
Solutions for issues like printer not printing, errors received, or LED status lights being off.
Guidance for resolving poor print quality, streaks, incorrect label feeding, or data transmission errors.
Solutions for missing Word Add-in icons and errors related to the cutter unit operation.
Tips for improving barcode readability and procedures for resetting the printer to factory settings.
