6 - 19 SETUP SEND
Delayed Fax
During the day you can store up to 50 faxes in the memory to be sent
within 24 hours. These faxes will be sent at the time of day you enter
in Step 3. Press Set to accept it, or enter another time for the faxes
to be sent.
1
If it is not illuminated in green, press (Fax). Place the
original face up in the ADF, or face down on the scanner glass.
2
Press Menu, 2, 2, 3.
3
Enter the time you want the fax to
be sent (in 24-hour format).
Press Set.
(For example, enter 19:45 for
7:45 PM.)
4
Press 1 if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
Press 2 if you have finished choosing settings, and then go to
Step 5.
5
Enter the fax number.
6
Press Start.
If you are using the scanner glass, go to Step 7.
7
To send a single page, press 2 (or press Start again).
The MFC starts scanning the fax.
—OR—
To send more than one page, press
1 and go to Step 8.
8
Place the next page on the scanner glass.
Press
Set.
The MFC starts scanning and returns to Step 7 (Repeat Step 7
and 8 for each additional page).
The number of pages you can scan into the memory depends
on the amount of data that is printed on each page.
22.Setup Send
3.Delayed Fax
Set Time=00:00
Enter & Set Key
To Next Page
Loading...
Need help?
General
