10. CLEANING
BAS-342G PS
54
10-4. Cleaning the control box air inlet ports
Use a vacuum cleaner to clean the filter in the air inlet ports
(2) of the control box (1) at least once a month.
10-5. Cleaning the eye guard
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
10-6. Checking the needle
Always check that the tip of the needle is not broken and
also that the needle is not bent before starting sewing.
10-7. Lubrication
Lubricate the sewing machine while referring to "4-18. Lubrication".
2766B
4027M
2208B
To Next Page
Loading...
