What to do if my Brother BAS-605 has a thread jam in the rotary hook race?
If your Brother Sewing Machine experiences a thread jam in the rotary hook race, it might be due to a burr on the edge of the binder. Try removing the burr and polishing the area. If that doesn't resolve the issue, lubricate or replace the affected parts.
General| Brand | Brother |
|---|---|
| Model | BAS-605 Series |
| Category | Sewing Machine |
| Language | English |
Detailed specifications for BAS-605 and BAS-606 sewing machines.
Compares features and specifications between BAS-605/606 and BAS-610/611/612 models.
Instructions for installing the stacker component onto the sewing machine.
Details on connecting air tubes to the valve units for machine operation.
Guide on filling the arm top oil tank and adjusting rotary hook lubrication.
Instructions for applying oil to specific points on the sewing machine.
How to adjust the marking light for accurate sewing start and end points.
Flowchart detailing the backtacking process with rear reference for BAS-605/606.
Flowchart for backtacking with front/center reference for BAS-605/606.
Lists and explains error codes for BAS-605/606, with troubleshooting steps.
Configuration settings for DIP switches on BAS-605/606 models.
Error code E00/E-0-00 indicates carriage feed movement issues.
Error code E10/E-1-00 indicates power-on issues, possibly with the start switch.
Error code E11/E-1-01 indicates power-on issues, possibly with the treadle.
Error code E12/E-1-02 indicates power-on issues, possibly with the treadle.
Error code E20/E-2-00 relates to carriage feed positioning and sensor issues.
Error code E21/E-2-01 indicates issues during automatic sewing, possibly with V-belt or fuses.
Error code E22/E-2-02 indicates sewing completion time issues, possibly with needle sensor.
Error code E30/E-3-00 indicates issues with carriage feed returning to home position.
Error code E31/E-3-01 relates to carriage feed movement to corner knife or home position.
Error code E32/E-3-02 indicates issues with carriage feed movement time.
Error code E33/E-3-03 indicates carriage feed movement issues, possibly with connectors or fuses.
Error code E34/E-3-04 relates to resetting after an error, possibly with carriage feed movement.
Error code E35/E-3-05 indicates issues with carriage feed movement, possibly with short stops or fuses.
Error codes E41/E-4-01/E-4-10 relate to flap sensor issues during flap program operation.
Error code E50/E-5-00 indicates power-on issues, possibly with memory.
Error codes E61/E-6-01/E-6-10/E-6-11 indicate thread breakage errors.
Error code E70/E-7-00 indicates a program data write error.
Error codes E80-E83/E-8-01-E-8-03 indicate corner knife errors.
Troubleshoots carriage feed not operating when power indicator is off.
Troubleshoots carriage feed not operating when power is on but home position is not located.
Troubleshoots issues preventing the machine from starting, checking switches and connectors.
Lists and explains error codes for BAS-612 automatic welt/flap feeder issues.
To Next Page
