3
Setting Up
the Machine
Windows
®
Mac OS
®
9.1 - 9.2
Mac OS
®
X
4
Fan the stack of paper well to avoid paper
jams and mis-feeds.
5
Gently insert the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray and
below the maximum paper mark.
6
Put the output paper tray back on and push
the paper tray firmly back into the machine.
1
Connect the power cord.
DO NOT connect the USB cable yet.
Warning
The machine must be fitted with an earthed plug.
1
After connecting the power cord, the LCD
shows:
2
Press
▲
or
▼
to select your language and
press Set.
3
If your language is selected, press
▲
(
Yes
).
■ Make sure the paper side guides touch
the sides of the paper.
■ Be careful not to push the paper too far
into the paper tray so it does not slide up
the back of the tray.
4
Installing the Power
Cord
5
Selecting Your
Language
Select Language
English?
▲
Yes
▼
No
If you have set the language wrongly, you
can change the language after setting the
date and time. (For details, see “How to
change LCD language” in Chapter 6 of the
User’s Guide)
To Next Page
Loading...
Need help?
General
