Brother DCP-130C - Enlarging or Reducing the Image Copied

Making copies
21
3
To temporarily change the quality setting,
follow the instruction below:
a Load your document.
b Press Copy Quality repeatedly to
choose Fast, Normal or Best.
c Press Black Start or Color Start.
To change the default setting, follow the
instruction below:
a Press Menu.
b Press a or b to choose 1.Copy.
Press OK.
c Press a or b to choose 3.Quality.
Press OK.
d Press a or b to choose Fast, Normal
or Best.
Press OK.
e Press Stop/Exit.
Enlarging or reducing the
image copied 3
You can select the following enlargement or
reduction ratios:
Custom(25–400%) allows you to enter a
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the
instruction below:
a Load your document.
b Press Enlarge/Reduce.
c Choose one of the options below:
 Use a or b to choose the
enlargement or reduction ratio you
want. Press OK.
 Use a or b to choose Custom
(25–400%). Press OK. Press a or
b to enter an enlargement or
reduction ratio from 25% to 400%.
Press OK.
d Press Black Start or Color Start.
Note
Page Layout Options 2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or Poster are not
available with Enlarge/Reduce.
Press
Enlarge/Reduce
Custom(25–400%)
200%
198% 4”×6”iA4
186% 4”×6”iLTR
142% A5iA4
104% EXEiLTR
100%*
97% LTRiA4
93% A4iLTR
83%
78%
69% A4iA5
50%