36
5
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Before Using
PictBridge
5
PictBridge requirements 5
To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center
®
operations are not
available when using the PictBridge
feature.
Using PictBridge 5
Setting your digital camera 5
Make sure your camera is in PictBridge
mode. If your camera is set to use the printer
settings, the following PictBridge settings are
available for your PictBridge compatible
camera. Depending on your camera some of
these settings may not be available.
1
Please See DPOF printing on page 37 for more
details.
2
When Color Enhancement is On in the camera
setting, you can set White Balance, Sharpness and
Color Density using the machine PhotoCapture
menu. (See Color Enhancement (True2Life
®
) on
page 32).
The names and availability of each setting
depends on the specification of your
camera.
The cropping setting is only available from
the machine menu. (See Cropping on
page 33)
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
PictBridge 5
Menu Selections Options
Paper Size Letter, A4, 4”× 6”,
Paper Type Plain Paper, Glossy
Paper, Inkjet Paper
Layout Borderless: On,
Borderless: Off
DPOF setting
1
-
Print Quality Normal, Fine
Color
Enhancement
2
On, Off
To Next Page
Loading...
