Brother DCP-310CN - Changing the Default Settings; Increasing Print Speed or Quality; Setting Paper and Size

WALK-UP PHOTOCAPTURE CENTER
™
3 - 9
Changing the default settings
You can save the PhotoCapture Center
™
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Increasing print speed or quality
1
Press
Menu
.
2
Press or to select
2.PhotoCapture
.
Press
Set
.
3
Press or to select
1.Print Quality
.
Press
Set
.
4
Press or to select
Normal
or
Photo
.
Press
Set
.
5
Press
Stop/Exit
.
Setting paper and size
1
Press
Menu
.
2
Press or to select
2.PhotoCapture
.
Press
Set
.
3
Press or to select
2.Paper & Size
.
Press
Set
.
4
Press or to select
Letter Glossy
,
10x15cm Glossy
,
13x18cm Glossy
,
A4 Glossy
,
Letter Plain
,
A4 Plain
,
Letter Inkjet
,
A4 Inkjet
or
10x15cm Inkjet
.
Press
Set
.
5
If you selected
A4
or
Letter
, press or to select the print
size (
10 x 8cm
,
13 x 9cm
,
15 x 10cm
,
18 x 13cm
,
20 x 15cm
or
Max. Size
).
Press
Set
.
6
Press
Stop/Exit
.
Downloaded from ManualsPrinter.com Manuals