Brother DCP-350C - Choosing Your Language (Canada Only)

Setting Up the Machine
9
4 The LCD shows:
Is Quality OK?
Yes i Press
No i Press
 If all lines are clear and visible, press
(Yes) to finish the quality check.
 If you can see missing short lines, press
(No) and go to step 5.
5 The LCD asks you if the print quality is OK for
black and color. Press (Yes) or (No).
Black OK?
Yes i Press
No i Press
Color OK?
Yes i Press
No i Press
After pressing (Yes) or (No) for both
black and color, the LCD shows:
Start Cleaning?
Yes i Press
No i Press
6 Press (Yes), the machine will then start
cleaning the colors.
7 After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
6 Choosing your language
(Canada only)
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Local Language.
Press OK.
4 Press a or b to choose your language
(English or French), and then press OK.
Local Language
English
French
5 Press Stop/Exit.
OK Poor