Installing the Driver & Software
15
Windows
®
USB
Windows
®
5 After reading and accepting the ScanSoft™
PaperPort™ 11SE License Agreement, click
Yes.
6 The installation of ScanSoft™ PaperPort™
11SE will automatically start and is followed by
the installation of MFL-Pro Suite.
7 When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
8 Choose Standard (DCP-350C) or
Local Connection (DCP-560CN), and then
click Next. The installation continues.
9 When this screen appears, go to the next step.
10 Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
11 Insert the USB cable into the USB socket
marked with a symbol. You will find the
USB socket inside the machine as shown
below.
12 Carefully route the USB cable through the
trench and out the back of the machine as
shown below and connect the cable to your
computer.
To Next Page
Loading...
