EasyManua.ls Logo

Brother DCP-395CN - Cleaning the Scanner Glass; Cleaning the Machines Printer Platen

Brother DCP-395CN
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting and Routine Maintenance
91
B
Cleaning the scanner glass B
a Lift the document cover (1). Clean the
scanner glass (2) and the white plastic
(3) with a soft lint-free cloth moistened
with a non-flammable glass cleaner.
Note
In addition to cleaning the scanner glass
with a non-flammable glass cleaner, run
your finger tip over the glass to see if you
can feel anything on it. If you feel dirt or
debris, clean the scanner glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
Cleaning the machine’s
printer platen B
CAUTION
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid an electrical shock.
a Lift the scanner cover until it locks
securely in the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, lint-free soft
cloth.
2
1
3
1
Downloaded from ManualsPrinter.com Manuals

Table of Contents

Other manuals for Brother DCP-395CN

Related product manuals