Brother DCP-395CN - Paper Options; Book Copy

Making copies
33
4
Paper options 4
Paper Type 4
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Paper Type.
d Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
e If you do not want to change additional
settings, press Black Start or
Color Start.
Paper Size 4
If copying on paper other than Letter size, you
will need to change the paper size setting.
You can copy only on Letter, Legal, A4, A5 or
Photo 4 × 6in. (10× 15 cm) paper.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Paper Size.
d Press d or c to choose Letter, Legal,
A4, A5 or 4"x6".
Press OK.
e If you do not want to change additional
settings, press Black Start or
Color Start.
Book Copy 4
Book copy corrects dark borders and skew.
Your machine can correct the data
automatically or you can make specific
corrections.
a Load your document.
b Enter the number of copies you want.
c Press a or b to choose Book Copy.
d Do one of the following:
 If you want to correct the data
yourself, press d or c to choose
On(Preview).
Press OK.
Press Black Start or Color Start
and go to step e.
 If you want the machine to correct
the data automatically, press d or c
to choose On and press OK.
Go to step f.
e Adjust the skewed data by using d or c.
Remove the shadows by using a or b.
f If you are finished making corrections,
press Black Start or Color Start.
Note
Page Layout, Ink Save Mode,
Fit to Page and Watermark Copy
are not available with Book Copy.
Downloaded from ManualsPrinter.com Manuals