Brother DCP-395CN - Setting the Backlight Brightness; Setting the DIM Timer for the Backlight; Printing Reports; How to Print a Report

General setup
25
3
Setting the backlight
brightness 3
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Backlight.
e Press d or c to choose Light, Med or
Dark.
Press OK.
f Press Stop/Exit.
Setting the Dim Timer for the
backlight 3
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
e Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f Press Stop/Exit.
Printing Reports 3
The following reports are available:
 Help List
A help list showing how to program your
machine.
 User Settings
Lists your settings.
 Network Config
Lists your Network settings.
How to print a report 3
a Press Menu.
b Press a or b to choose
Print Reports.
Press OK.
c Press a or b to choose the report you
want.
Press OK.
d Press Black Start.
e Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals