Brother DCP-395CN - Page 56

Chapter 5
44
Enhance Skin-Tone 5
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
color in your photos and adjusts the image.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Enhance Skin-Tone.
Press OK.
Note
You can also adjust the effect level
manually, by pressing a or b.
e Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f Do one of the following:
 Press OK and change the print
settings. (See page 49.)
 If you do not want to change any
settings, press Color Start to print.
Enhance Scenery 5
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue area in your photo, so that the
landscape looks more sharp and vivid.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
b Press a or b to choose
Enhance Photos.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Enhance Scenery.
Press OK.
Note
You can also adjust the effect level
manually, by pressing a or b.
e Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f Do one of the following:
 Press OK and change the print
settings. (See page 49.)
 If you do not want to change any
settings, press Color Start to print.
Downloaded from ManualsPrinter.com Manuals