6
4
Connect the power cord
a Connect the AC power cord to the machine and
then plug it into an AC power outlet.
b Turn the machine's power switch on.
5
Choose your language
(if needed)
a Press Menu, 1, 0.
b Press a or b to choose your language.
Press OK.
c Press Stop/Exit.
6
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu, 1, 6.
b Press c to increase the contrast.
—OR—
Press d to decrease the contrast.
Press OK.
c Press Stop/Exit.
DO NOT connect the interface cable
yet.
To Next Page
Loading...
