2-22
Confidential
Error
codes
Problem
Refer
to:
Error
codes
Problem
Refer
to:
B000
Detected that the first side CIS
flat cable or second side CIS flat
cable was not inserted correctly.
2-58 C800
The memory size allotted for
Secure Print was exceeded
when saving Secure Print data.
2-61
B100 An unidentified error occurred. 2-58 CA00
A USB device not within the
specifications is connected to
the USB terminal, resulting in
overcurrent.
2-62
B200 An unidentified error occurred. 2-58 CB00 An unidentified error occurred. 2-62
B300 An unidentified error occurred. 2-58 CC00 An unidentified error occurred. 2-62
B400 An unidentified error occurred. 2-58 CD00 An unidentified error occurred. 2-62
B500 An unidentified error occurred. 2-58 CE00 An unidentified error occurred. 2-62
B600 An unidentified error occurred. 2-58 CF00 An unidentified error occurred. 2-62
B700
The voltage value was above the
upper limit during scanning.
2-58 D000
An error occurred while
initializing the touch panel.
2-62
B800
The voltage value was below the
lower limit during scanning.
2-58 D100
An error occurred while
initializing the modem.
2-62
B900
The white level does not increase
during scanning although the light
intensity was increased.
2-58 D200 An unidentified error occurred. 2-62
BA00 An unidentified error occurred. 2-59 D300 An unidentified error occurred. 2-62
BB00
A white level not within the
standard was scanned when
function code 55 was executed.
2-59
D400 An unidentified error occurred. 2-62
BC00
Although operation was retried due
to error AC00 that occurred while
scanning the fax, white or black
correction data for the second side
CIS was not within the correct range.
2-59 D500 An unidentified error occurred. 2-62
BD00
A black level not within the
standard was scanned when
function code 55 was executed.
2-59
D600 An unidentified error occurred. 2-62
BE00 An unidentified error occurred. 2-60 D700 An unidentified error occurred. 2-62
BF00
The second side document
scanning position sensor detected
that the ADF was unable to
duplex-feed the document
because the document is too long.
2-60 D800 An unidentified error occurred. 2-62
C000
The new toner sensor could not
detect the new toner cartridge
correctly.
2-60
D900 An unidentified error occurred. 2-62
C100 An unidentified error occurred. 2-61 DA00 An unidentified error occurred. 2-62
C200 An unidentified error occurred. 2-61 DB00 An unidentified error occurred. 2-62
C300 An unidentified error occurred. 2-61 DC00 An unidentified error occurred. 2-62
C400 An unidentified error occurred. 2-61 DD00
Fuser unit error (except error
codes 6A00 to 6F00, 7600,
7800, DE00, and E200)
2-63
C500 An unidentified error occurred. 2-61 DE00
When the center thermistor of the
fuser unit is higher than the idle
temperature, the side thermistor
detected a temperature lower than
the specified temperature.
2-63
C600 An unidentified error occurred. 2-61 DF00 An unidentified error occurred. 2-64
C700
There is insufficient memory to
expand PC-print data.
2-61
E000
An error occurred in the ROM
check sum.
2-64
To Next Page
Loading...
Need help?
General
Weight and Dimensions
