Brother DCP-J315W - Checking the Print Alignment

36
Checking the print alignment A
You may need to adjust the print alignment
after transporting the machine, if your printed
text becomes blurred or images become
faded.
a Press Menu.
b Press a or b to choose
Ink Management.
Press OK.
c Press a or b to choose Test Print .
Press OK.
d Press a or b to choose Alignment.
Press OK.
e Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
 If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press + (Yes) to
finish Alignment Check, and go to
step i.
 If another test print number is a
better match for either 600 dpi or
1200 dpi, press - (No) to choose it.
g For 600 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
h For 1200 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
i Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals