Specifications
67
D
Interfaces D
1
Your machine has a full-speed USB 2.0 interface. This interface is compatible with Hi-Speed USB 2.0; however, the
maximum data transfer rate will be 12 Mbits/s. The machine can also be connected to a computer that has a USB 1.1
interface.
2
Third party USB ports are not supported.
USB
12
Use a USB 2.0 interface cable that is no longer than 2 m.
Wireless LAN
(DCP-J315W only)
IEEE 802.11b/g (Infrastructure/Ad-hoc Mode)
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
