Brother DCP-J4110DW - Flushing Base

3-103
Confidential
9.28 Flushing Base
(1) Release the wiring of the harnesses at the right side of the machine.
(2) Remove the three screws (TAPTITE CUP B M3x10), release the hook, and remove the
tube support plate.
Lower cover
Tube support plate
Purge cam sensor
harness
TAPTITE CUP B M3x10
(Rear)
(Front)
Hook
Registration
sensor harness
FG wire
Carriage motor harness
(3_085_E)