Brother DCP-J525W - Loading Documents for Copy;Scan; Loading Documents via ADF

24
3
How to load
documents
3
You can make copies and scan from the ADF
(automatic document feeder) (DCP-J725DW
only) and from the scanner glass.
Using the ADF (DCP-J725DW
only) 3
The ADF can hold up to 15 pages
1
and feeds
each sheet individually. Use 90 gsm paper
and always fan the edges of the pages before
placing them in the ADF.
1
The ADF can hold up to 20 pages, if you stagger the
pages and meet the following conditions:
Temperature: 20 - 26 °C
Humidity: 40 - 50% without condensation
Paper: XEROX4200 75 gsm
Document Sizes and Weights 3
How to load documents 3
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric with the ADF. Instead use the
scanner glass.
Make sure documents written with ink or
modified with correction fluid are completely
dry.
a Unfold the ADF Document Support (1)
and the ADF Document Support
Flap (2).
Note
DO NOT use the ADF Document Support
Flap for Legal size paper. (Only available
for some countries.)
b Fan the pages well.
c Adjust the paper guides (1) to fit the
width of your documents.
Stagger the pages of the documents
and place them face down, top edge
first in the ADF underneath the guides
until you feel them touch the feed rollers.
The screen will display ADF Ready.
Loading documents 3
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight: 64 to 90 gsm
2
1
1