Brother DCP-J562DW - Interface Specifications; Network Specifications

Interface Specifications
USB
1 2
Use a USB 2.0 interface cable that is no longer than 2 m.
LAN
(MFC-J880DW)
Use an Ethernet UTP cable category 5 or greater.
Wireless LAN IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode)
IEEE 802.11g/n (Wi-Fi Direct)
NFC
(MFC-J880DW)
Yes
1
Your machine has a USB 2.0 Hi-Speed interface. The machine can also be connected to a computer that has a USB 1.1 interface.
2
Third party USB ports are not supported.
Network Specifications
You can connect your machine to a network for Network Printing, Network Scanning, PC-Fax Send, PC-Fax
Receive (Windows
®
only), Remote Setup, and to access photos from PhotoCapture Center. Also included
is Brother BRAdmin Light
1
Network Management software.
(Windows
®
) If you require more advanced machine management, use the latest Brother BRAdmin
Professional utility version. Go to your model's Downloads page on the Brother Solutions Center at
http://
support.brother.com to download the software.
Wireless Network Security SSID (32 characters), WEP 64/128
bit, WPA-PSK (TKIP/AES), WPA2-
PSK (AES)
Wireless Setup Support Utility
AOSS
™
Yes
WPS Yes
Computer Requirements Specifications
Supported Operating Systems And Software Functions
Computer Platform
& Operating System
Version
PC Interface Processor Hard Disk Space to install
USB
1
10/100 Base-TX
(Ethernet)
2
Wireless
802.11b/
g/n
For Drivers For
Applications
(Including
Drivers)
Wind
ows
®
Oper
ating
Syste
m
Windows
®
XP Home
3 4
Windows
®
XP
Professional
3
4
Printing
PC Fax
5
Scanning
Removable Disk (USB or Memory card)
6
Network Media Access (LAN)
6
32 bit (x86) or
64 bit (x64)
processor
150 MB 1 GB
Windows
Vista
® 3 4
500 MB 1.3 GB
Windows
®
7
3
4
Windows
®
8
3
4
650 MB
1
Brother BRAdmin Light is available as a download from Brother Solutions Center. Go to your model's Downloads page on the Brother
Solutions Center at
http://support.brother.com to download the software.
601