Brother DCP-J725DW - Using the Scanner Glass

Dialling and storing numbers (MFC models only)
27
5
Additional ways to
store numbers
5
Storing Speed Dial numbers
from Outgoing Calls 5
You can also store Speed Dial numbers from
the Outgoing Call history.
a Press Redial/Pause.
You can also choose the number by
pressing History.
Note
You can also add numbers from the
history in a different way. First, press
Menu, and then Fax,
Setup Speed Dial,
Set Speed Dial and
Add Number from History.
b Press s or t to display the name or
number you want to store.
c Press the name or number you want to
store.
d Press More.
e Press Add Speed Dial.
f Do one of the following:
 Enter the name (up to 16 characters)
by pressing the buttons on the
Touchscreen.
(uuBasic User’s Guide: Entering
Text)
Press OK.
 To store the number without a name,
press OK.
g Press OK to confirm the fax or telephone
number you want to store.
h Do one of the following:
 Enter the second fax or telephone
number (up to 20 digits) by pressing
the buttons on the Touchscreen.
Press OK.
 If you do not want to store a second
number, press OK.
i To choose where the number will be
stored, do one of the following:
 To accept the displayed next
available Speed Dial location, press
OK.
 To enter a different Speed Dial
location, press and a 2-digit
number by pressing the buttons on
the Touchscreen.
Press OK.
Note
If the 2-digit Speed Dial location you
choose is already taken, the OK button on
the LCD will not work. Choose a different
location.
j When the LCD displays your settings,
press OK to confirm.
k Press Stop/Exit.