Brother DCP-J725DW - Cleaning the Print Head; Checking Print Quality

Printing photos from a memory card or USB Flash memory drive (MFC-J625DW and DCP-J725DW only)
43
8
PhotoCapture Center™
print settings
8
You can change the print settings temporarily
for the next print job.
(MFC models only) The machine returns to its
default settings after being idle for 3 minutes,
or if the Mode Timer returns the machine to
Fax mode. (See Mode Timer (MFC models
only) uu page 4.)
Note
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as a new
default uu page 47.)
Print Quality 8
a Press (PHOTO) or Photo.
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b Press Options.
c Press s or t to display
Print Quality.
d Press Print Quality.
e Press Normal or Photo.
f If you do not want to change additional
settings, press .
Press Start to print.
Paper options 8
Paper Type 8
a Press (PHOTO) or Photo.
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b Press Options.
c Press s or t to display Paper Type.
d Press Paper Type.
e Press s or t to display Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61 or Other Glossy.
Press the option you want to set.
f If you do not want to change additional
settings, press .
Press Start to print.
Paper and print size 8
a Press (PHOTO) or Photo.
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b Press Options.
c Press s or t to display Paper Size.