Brother DCP-J725DW - Print Images

Chapter 5
32
Print Images 5
View Photos 5
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press Photo.
b Press View Photos.
c Press s or t to display the photo you
want to print.
d Press + or - to select the number of
copies you want to print.
e Repeat step c and d until you have
chosen all the photos that you want to
print.
Press OK.
f You now have the following options.
 If you want to change the print
settings, press Options.
(uuAdvanced User’s Guide:
PhotoCapture Center™ print
settings)
 If you do not want to change any
settings, go to step g.
g Press Colour Start to print.
PhotoCapture Center™
print settings
5
You can change the print settings temporarily
for the next print.
The machine returns to its default settings
after 3 minutes.
Note
You can save the print settings you use
most often by setting them as the default.
(uuAdvanced User’s Guide: Setting your
changes as a new default)