35
7
7
Scanning a document 7
There are several ways to scan documents.
You can use the Scan button on the screen
or the scanner drivers on your computer.
a To use the machine as a scanner, you
must install a scanner driver. If the
machine is on a Network, configure it
with a TCP/IP address.
Install the scanner drivers from the
CD-ROM. (uuQuick Setup Guide)
Configure the machine with a TCP/IP
address if network scanning does not
work. (uuSoftware User’s Guide:
Configuring Network Scanning for
Windows
®
and Configuring network
scanning for Macintosh)
b Load your document. (See How to load
documents uu page 24.)
Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically. (DCP-J725DW only)
Use the scanner glass to scan a
page of a book or one sheet at a
time.
c Do one of the following:
To scan using the Scan button on
the screen, go to Scanning using the
scan button.
To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
Scanning using the
scan button
7
For more information
uuSoftware User’s Guide: Using the Scan
key
a Press Scan.
b Press s or t to display the available
scan modes, and then press the scan
mode you want to use.
Scan to File
Scan to Media
(DCP-J725DW only)
Scan to email
Scan to OCR
1
(DCP-J725DW only)
Scan to Image
Web Service
2
(Web Services Scan)
1
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) uu page 4 for
further instructions.
2
(Windows
®
users only)
(uuSoftware User’s Guide: Using Web
Services for scanning (Windows Vista
®
SP2
or later and Windows
®
7) on your network)
c (For network users)
Choose the computer you want to send
the data to.
d Press Start to begin scanning.
How to scan to a computer 7
To Next Page
Loading...
Need help?
General
Weight and Dimensions
