Brother DCP-J725DW - Page 73

Menu and features
65
C
Network
(Continued)
WPS w/PIN Code — — You can easily configure
your wireless network
settings using WPS with
a PIN code.
See .
WLAN Status Status — You can see the current
wireless network status.
Signal — You can see the current
wireless network signal
strength.
SSID — You can see the current
SSID.
Comm. Mode — You can see the current
Communication Mode.
MAC Address — — You can see your
machine’s MAC address
from the control panel.
WLAN Enable — On
Off*
Lets you use the wireless
network connection.
Network Reset — — Restore all network
settings to factory
default.
Level1 Level2 Level3 Options Descriptions Page
NetworkUser’sGuide
The factory settings are shown in Bold with an asterisk.