Brother DCP-J752DW

2
a Remove the protective tape and film covering
the machine, and also from the Touchscreen.
b Remove the plastic bag a containing the ink
cartridges from on top of the paper tray.
c Make sure you have all the components.
2
Connect the power cord
WARNING
The machine must be fitted with an earthed
plug.
a Connect the power cord.
3
Choose your language
a Press a or b to display your language and
press the desired language.
Press OK.
b Press Yes or No.
4
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a Make sure that the power is turned on.
The Touchscreen will show No Ink
Cartridge.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
NOTE
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
1
(Example for UK)
NOTE
If you set the wrong language, you can change it
after setting the date and time. (uuAdvanced
User’s Guide: Changing the Touchscreen
language)
NOTE
Make sure you install the Introductory Ink
Cartridges included with your machine first.
NOTE
You can adjust the control panel angle to read the
Touchscreen more easily. Hold the edge of the
control panel to avoid accidentally pressing any of
the Touchscreen options.