Brother DCP-L3515CDW - Quick Setup Guide Manual

Unpack the machine and check the components
1
Remove the packing materials and re-install the toner cartridge and drum unit assemblies
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Adjust the paper
guides.
Do not exceed this mark.
x4
Remove the orange parts
from each cartridge.
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Video setup instructions:
support.brother.com/videos
EN
DCP-L3515CDW / DCP-L3520CDW / DCP-L3520CDWE / DCP-L3527CDW /
DCP-L3555CDW / DCP-L3560CDW / MFC-L3740CDW / MFC-L3740CDWE /
MFC-L3760CDW / MFC-L8340CDW / MFC-L8390CDW
D027VF001-00
UK
Version 0
NOTE:
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
• Network cable (DCP-L3555CDW / DCP-L3560CDW /
MFC-L3740CDW / MFC-L3740CDWE / MFC-L3760CDW /
MFC-L8390CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The illustrations in this Quick Setup Guide show the
MFC-L8390CDW.
• Brother aims to reduce waste and save both raw materials and the
energy required to produce them.
Read more about our environmental work at www.brotherearth.com.
Toner Cartridge and Drum
Unit Assemblies*
(Black, Cyan, Magenta, and
Yellow)
Waste Toner Box* Belt Unit*
* Installed in the machine
AC Power Cord Quick Setup Guide
Product Safety Guide
Remove all the blue packing tape.
NOTE:
Before connecting the power
cord, locate the Serial
Number label on the back or
side of the machine. Record
this number for Registration
and Warranty support.
Push firmly.
BK
C
M
Y
4
Select your country/language
(Initial setup only)
Front
Location of the power button varies depending
on the model.
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.