Brother DCP-L8400CDN - How to Reset the Machine

Troubleshooting
131
B
How to reset the machine B
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Press Reset.
f Press Machine Reset, Network,
All Settings or Factory Reset.
g Do one of the following;
 To reset the settings, press Yes and
go to step h.
 To exit without making changes,
press No and go to step i.
h You will be asked to reboot the machine.
Do one of the following;
 To reboot the machine press Yes for
2 seconds. The machine will begin
the reboot.
 To exit without rebooting the
machine, press No. Go to step i.
NOTE
If you do not reboot your machine, the
reset will not finish and your settings will
remain unchanged.
i Press .
NOTE
You can also reset the Network settings
by pressing , All Settings,
Network, Network Reset.