Brother DCP-L8400CDN - How to Scan a Document as a PDF File Using the Touchscreen

How to scan to a computer
47
7
How to scan a document as a PDF file using the
Touchscreen 7
a Load your document (see How to load documents on page 35).
b Press Scan.
c Swipe left or right to display to File.
will be displayed in the centre of the Touchscreen highlighted in blue.
d Press OK.
When the machine is connected to a network, press the computer name.
Do one of the following:
 If you want to use the default settings, go to step h.
 If you want to change the default settings, go to step e.
e Press Options. Scan Settings will change to Set at Device.
f Choose the settings for 2-sided Scan
1
, Scan Type, Resolution, File Type, Scan
Size and Remove Background Colour as needed.
g Press OK.
h Press Start.
The machine starts the scanning process.
1
DCP-L8450CDW