Brother DCP-L8400CDN - Set the Date and Time; Volume Settings; Beeper Volume

General information
19
1
Set the date and time 1
The Touchscreen displays the date and time.
a Press .
b Press .
c Press Date.
d Enter the last two digits of the year using
the numbers on the Touchscreen, and
then press OK.
(e.g., Enter 1, 4 for 2014.)
e Enter the two digits for the month using
the numbers on the Touchscreen, and
then press OK.
f Enter the two digits for the day using the
numbers on the Touchscreen, and then
press OK.
g Press Time.
h Enter the time in 24-hour format using
the numbers on the Touchscreen, and
then press OK.
i Press .
Volume settings 1
Beeper volume 1
When the beeper is on, the machine will beep
when you press a button or make a mistake.
You can choose from a range of volume
levels.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Volume.
f Press Volume.
g Press Beep.
h Press Off, Low, Med or High.
i Press .