Chapter 2
8
Configure Secure Function
Lock 3.0 Using Web Based
Management 2
Set up groups with restrictions and users with
a password and card ID (NFC ID)
1
. You can
set up to 100 restricted groups and 100 users.
Configure these settings using a web
browser. To set up the web page, see Before
you begin to use Secure Function Lock 3.0
on page 7. Then follow these steps:
1
For MFC-L9550CDW
a Click Administrator.
b Click Restricted Functions xx-xx.
c Type an alphanumeric Group name (up
to 15 characters) in the User List /
Restricted Functions field.
d In the Print and other columns, clear the
check box to restrict access to
operations. To configure the maximum
page count, select the On check box in
Page Limits, and then type the number
in the Max. Pages box.
e Click Submit.
f Click User List xx-xx.
g In the User List field, type the user
name up to 20 characters.
h In the PIN Number box, type a four-digit
password.
i (For MFC-L9550CDW)
In the Card ID (NFC ID) box, type the
card number (up to 16 characters.)
1
1
You can use numbers from 0 - 9 and
letters from A - F (not case-
sensitive).
j Select User List / Restricted
Functions from the drop-down list for
each user.
k Click Submit.
To Next Page
Loading...
Need help?
General
