Brother DCP-T310 - Page 495

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce
Printing Noise
Reduce Printing Noise
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes
slower.
The factory setting is [Off].
• When the Quiet Mode setting is turned on, appears on the Home screen.
>> DCP-T310/DCP-T510W/DCP-T710W
>> MFC-T910DW
DCP-T310/DCP-T510W/DCP-T710W
1. Press Menu.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Ecology]. Press OK.
c. Select [Quiet Mode]. Press OK.
d. Select [On] (or [Off]). Press OK.
3. Press Stop/Exit.
MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Quiet Mode]. Press OK.
c. Select [On] or [Off]. Press OK.
3. Press Stop/Exit.
Related Information
• General Settings
• Paper Handling and Printing Problems
489