Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
the Language Displayed on the LCD
Change the Language Displayed on the LCD
Change the LCD language if needed.
This feature is not available in some countries.
>> DCP-T310/DCP-T510W/DCP-T710W
>> MFC-T910DW
DCP-T310/DCP-T510W/DCP-T710W
1. Press Menu.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Local Language]. Press OK.
c. Select your language. Press OK.
3. Press Stop/Exit.
MFC-T910DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Local Language]. Press OK.
c. Select your language. Press OK.
3. Press Stop/Exit.
Related Information
• General Settings
490
To Next Page
Loading...
