CAUTION
Put your product on a flat, level, stable surface (such as a desk), that is
free from vibration and shocks. Put the product near a telephone socket
(MFC models only) and a standard grounded electrical socket.
DO NOT place this product on an unstable cart, stand, or table,
particularly if children are expected to be near the product. The product
is heavy and may fall, causing injury to you or others and serious
damage to the product. For the products with scanning functionality,
there is an added risk of injury if the scanner glass should break.
Avoid placing your product in a busy area. If you must place it in a busy
area, ensure that the product is in a safe location where it cannot be
accidentally knocked over, which could cause injury to you or others
and serious damage to the product.
Ensure that cables and cords leading to the product are secured so as
not to pose a tripping hazard.
DO NOT place heavy objects on the product.
DO NOT place any objects around the product. Such objects block the
access to the electrical socket in case of emergency. It is important that
the product can be unplugged whenever needed.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or
generate magnetic fields. Doing so may interfere with the operation of
the product, causing print quality problems.
• DO NOT tip or turn the product upside down after ink tanks are filled.
Doing so may cause ink spillage and internal damage to the product.
• DO NOT place your product next to sources of interference, such as
speakers or the base units of non-Brother cordless telephones. Doing
so may interfere with the operation of the product's electronic
components.
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
