MFC-T920DW/MFC-T925DW
1. Place your identification card face down near the upper-left corner of the scanner glass.
2 in 1 ID (Vertical) 2 in 1 ID (Horizontal)
a. 3 mm or greater (top, left)
b. 145 mm
c. 2 in 1 ID (Vertical): 207 mm
2 in 1 ID (Horizontal): 102 mm
d. Scannable area
2. Press
(COPY).
3. Enter the number of copies using the dial pad.
4. Press a or b to select the following:
a. Select [Page Layout]. Press OK.
b. Select [2in1 ID Vertical] or [2in1 ID Horizontal]. Press OK.
5. Press Mono Start or Colour Start.
The machine starts scanning one side of the identification card.
6. After the machine has scanned the first side, turn over the identification card and press c to scan the other
side.
Related Information
• Copy
138
To Next Page
Loading...
