Brother FAX-1355 User Manual

Chapter 10
52
Changing Remote Fax
Options
10
If received faxes are left in your machine's
memory when you change the remote fax
options, the LCD will ask you one of the
following messages:
Erase All Doc?
1.Yes 2.No
Print All Fax?
1.Yes 2.No
 If you press 1, faxes in the memory will be
erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
 If you press 2, faxes in the memory will not
be erased or printed and the setting will be
unchanged.
Turning off Remote Fax
Options 10
a Press Menu, 2, 5, 1.
1.Forward/Store
b Press a or b to choose Off.
Press OK.
c Press Stop/Exit.
Note
The LCD will give you more options if
there are received faxes still in your
machine’s memory. (See Changing
Remote Fax Options on page 52.)
Remote Retrieval 10
You can call your machine from any touch
tone telephone or fax machine, then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code 10
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is inactive code (---l).
a Press Menu, 2, 5, 2.
2.Remote Access
b Enter a three-digit code using numbers
0-9, l, or #.
Press OK. (The preset ‘l’ cannot be
changed.)
c Press Stop/Exit.
Note
Do not use the same code as your fax
receive code (l 5 1) or telephone answer
code (# 5 1). (See Operation from
extension telephones on page 40.)
You can change your code at any time by
entering a new one. If you want to make your
code inactive, press Clear/Back in step b to
restore the inactive setting (---l) and
press OK.

Brother FAX-1355 Specifications

General

Type	Plain paper fax
Modem Speed	14.4 Kbps
Paper Capacity	250 sheets
Dimensions	14.6" (W) x 14.2" (D) x 7.9" (H)
Paper Tray Capacity	250 sheets
Fax Memory	400 pages
Copier Function	Yes
Caller ID	Yes
Speed Dials	100