Brother GT-3 Series - Page 13

According to the Instruction Manual, this Capping Cartridge White should be
placed in the machine after WTC for long term storage [i.e. Holidays ].
This Maintenance Cartridge for CMYK should be used to perform the every
three months. It is the only way to clean easily all the little color tubes inside the
Maintenance station and keep a good suction of the pump to clean PrintHeads.
> It is also a consumable like the MNT Cartridge for White. Mark the date or check the 5L bottles.
12
+
SPARE PARTS NUMBER:
SB 3006001
+
SPARE PARTS NUMBER:
SB 3047001
+
SPARE PARTS NUMBER:
SB 3265201
> CAP FELT :
> CAPPING CARTRIDGE WHITE:
> MAINTENANCE CARTRIDGE for CMYK :
When needed, you can replace the Cap Felt
sitting in between the two sets of four caps.
Just lift it and place a new one instead.
1 2 3 4
   
GT-3 Series
1 2 3 4
   
GT-3 Series
SB3047001
W
!
TO BE USED for QUARTERLY MAINTENANCE
CTC