> Mandatory Temperature & Humidity Requirements :
18
MIN
TEMPERATURE
30
MAX
C
°
°
HUMIDITY
45
MIN
85
MAX
%
ENVIRONMENTAL CONDITIONS
There are several maintenance procedures that must be performed on a daily, weekly, or
prompted basis to help keeping your printer performing properly.
This guide will list the maintenance items that must be performed.
Please see the individual technical guide for each specic maintenance procedure for step by step instructions.
> HOW TO DO A PRINT HEAD CLEANING ?
Only a few nozzles missing, then Head Cleaning > Normal Cleaning ... and select PH + OK
If more then 10 nozzles, perform Head Cleaning > Powerful Cleaning ... and select PH + OK
Perform a new Nozzle Test to check the result and redo if not all nozzles are ring
PHC
FIRST BASIC STEPS
OVERVIEW OF GT3 MAINTENANCE
1
Switch on the printer and insert a USB stick.
Go to the menu: Maintenance > Log copy to USB
HOW TO CREATE A LOG FILE ?
> HOW TO DO A NOZZLE TEST ?
Always place the Platen at level A
Menu > Test Print > Nozzle Check CMYK > OK to check colors on white paper sheet
Menu > Test Print > Nozzle Check White > OK to check whites on transparent or black sheet
If not all the nozzles are ring, start a Head Cleaning
NZC
!
TO BE DONE EVERY WORKING DAY
FIRST BASIC STEPS
To Next Page
Loading...
Need help?
General
