> WIPER CLEANER REPLACEMENT :
The Wiper Cleaner needs to be replaced reg-
ularly according to MPE or visual inspection.
Clean the Print Head Caps and Wiper Blade
before replacing the Wiper Cleaner !
+
SPARE PARTS NUMBER:
SB3101001
> FAN FILTER REPLACEMENT :
The fan lter collects the mist from the print head spray from
the exhaust provided by the fan.
> Remember to place the new lter with the “Coarse” side in-
serted into the bracket.
> The air ow should enter the rougher side.
+
SPARE PARTS NUMBER:
SB3018001
> CARRIAGE FELTS REPLACEMENT [now Roller Felts] :
The Carriage contains 2 brackets on the front edge that
hold 4 felt pads onto Velcro inserts.
The carriage assembly has 2 wheels that ride along the front
rail.
The pads keep the rail clean to help allow the carriage move
unrestricted and smooth.
Be carefull not to bend the 2 brackets, it may end up with errors
(i.e. 6107. 6108) and also, do NOT put oil on the felts !
+
SPARE PARTS NUMBER:
SB 2652101
8
To Next Page
Loading...
