Brother GTX Series - Daily Maintenance Procedures; Nozzle Test Procedure; Print Head Cleaning Procedure

6
> HOW TO DO A NOZZLE TEST ?
NZC
NZC
!
TO BE DONE EVERY WORKING DAY
>
You have to print a nozzle test for White & CMYK every morning before using the printer.
It is the only way to know the status of the nozzles in the machine !
NOZZLE TEST
> HOW TO DO A PRINT HEAD CLEANING ?
If only a few nozzles are missing, select Head Cleaning > Powerful Cleaning ... and select PH + OK
If more than 10 nozzles, select Head Cleaning > Super Cleaning ... and select PH + OK
> Perform a new Nozzle Test to check the result and redo if not ALL nozzles are ring!
PHC
> If not all nozzles are ring, start a Head Cleaning to open the closed nozzles !
Always place the Platen at level A
Menu > Test Print > Nozzle Check CMYK > to check colors on a white paper sheet
OK
MENU
Repeat the same procedure to perform a nozzle test of the White printhead
Menu > Test Print > Nozzle Check White > to check White on a black paper sheet or inkjet plastic sheet
OK
MENU
DAILY MAINTENANCE