>
> The remaining Cleaning Solution from
the Cleaning Cup should be emptied in the
Maintenance Station under the front side of
each Flushing Receivers
TO BE DONE EVERY WEEK
Nozzle Guards Cleaning
Both white plastic wipers [White & CMYK] should be cleaned
on both sides and top with the Cleaning Stick R dipped in
Cleaning Solution.
Use the tip of the Cleaning Stick R
to clean under the teeth of the wiper
holder and remove the dried ink
Be sure to use the Cleaning stick R
separately for white ink and color ink!
TO BE DONE EVERY WEEK
>
Wiper Cleaning
Wipe clean the 2 nozzle guards & and the black resin area with the Clean Stick R
dipped in Cleaning Solution
Be sure not to touch the nozzle surface at all !
Manually move the carriage to such a position
that you can perform the cleaning with ease
1
2
3
4
1 2
3
4
8
CLEAN
To Next Page
Loading...
