Perform the procedure shown below if the message "Remove the white ink cartridge
and shake it" is displayed before starting operation.
Remove the white ink cartridge
from the printer. Shake the
cartridge horizontally 100 times
side to side to stir the white ink.
It's extremely important to understand how to agitate the ink daily - it's just as important to
understand when to perform both the agitation and press on the panel after reinserting
the ink. If you are not printing for a few days, you should avoid doing this process. There
are some rules to follow as to when you should agitate the ink and press . The printer will
automatically perform a White Ink Relling to refresh the ink in the lines and head after you
reinsert the ink cartridge and press .
DAILY AGITATION OF WHITE INK
When to Agitate the White Ink and Press "OK"
When the ink pouch becomes approximately
15cm in length, shake the cartridge with its
cover open. This will slightly unwind the ink
pouch and make the ink easier to stir.
Repeat the same process on the other
white ink cartridge.
4
Watch the Video: Daily Process
of GTX White Ink Agitation
To Next Page
Loading...
