Control panel
3 - 2
3
LED Printer status
Sleep mode
The power switch is off or the printer is in Sleep mode. Pressing the Go button
wakes up the printer from Sleep mode to Ready mode.
Ready to print
The printer is ready to print.
Warming up
The printer is warming up.
Receiving data
The printer is either receiving data from the computer, processing data in
memory or printing the data.
Data remaining in memory
Print data is left in the printer memory. If the Ready LED blinks for a long time
and nothing has printed, press the Go button to print the data that is still in
memory.
Toner low
Indicates that the toner cartridge is nearly empty. Purchase a new toner
cartridge and have it ready for when Toner Life End is indicated.
The Toner LED alternates turning on for 2 seconds and off for 3 seconds.
To Next Page
Loading...
