3-26
Confidential
9.5
Inner Chute ASSY, Eject Pinch Roller R ASSY and Eject Pinch Roller L ASSY
(1) Pull down both side Green envelope levers of the Fuser unit.
(2) Remove the two Taptite bind B M4x12 screws to remove the Inner chute ASSY.
Fig. 3-20
Assembling Note:
• When assembling the Inner chute ASSY, align the Hooks of the Inner chute ASSY with
the Positioning holes of the Top cover ASSY.
• Pull up both side Green levers of the Fuser unit after assembling the Inner chute ASSY.
Green envelope lever L
Fuser unit
Fuser unit
Green envelope lever R
Inner chute ASSY
Taptite bind B M4x12
Positioning holes
Hooks
To Next Page
Loading...
