Control Panel
56
3
DRUM END SOON
The drum unit will need to be replaced soon. We recommend that you get a new
drum unit to replace the current one. See Replacing the drum unit on page 79.
The Drum LED will turn on for 2 seconds and off for 3 seconds.
REPLACE DRUM
Replace the drum with a new one. See Replacing the drum unit on page 79.
NO PAPER T1
Put paper in the paper tray. Then press Go. See Printing on plain paper, recycled
paper, bond paper, thin paper or thick paper on page 10.
MANUAL FEED
Put paper in the manual feed slot. See Printing on plain paper, recycled paper, bond
paper, thin paper or thick paper on page 10 or Printing on labels or envelopes
on page 15.
LEDs Machine Status
To Next Page
Loading...
